You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
344 lines
12 KiB
Python
344 lines
12 KiB
Python
#!/usr/bin/env python
|
|
|
|
"""
|
|
pyboard interface
|
|
|
|
This module provides the Pyboard class, used to communicate with and
|
|
control the pyboard over a serial USB connection.
|
|
|
|
Example usage:
|
|
|
|
import pyboard
|
|
pyb = pyboard.Pyboard('/dev/ttyACM0')
|
|
|
|
Or:
|
|
|
|
pyb = pyboard.Pyboard('192.168.1.1')
|
|
|
|
Then:
|
|
|
|
pyb.enter_raw_repl()
|
|
pyb.exec('pyb.LED(1).on()')
|
|
pyb.exit_raw_repl()
|
|
|
|
Note: if using Python2 then pyb.exec must be written as pyb.exec_.
|
|
To run a script from the local machine on the board and print out the results:
|
|
|
|
import pyboard
|
|
pyboard.execfile('test.py', device='/dev/ttyACM0')
|
|
|
|
This script can also be run directly. To execute a local script, use:
|
|
|
|
./pyboard.py test.py
|
|
|
|
Or:
|
|
|
|
python pyboard.py test.py
|
|
|
|
"""
|
|
|
|
import sys
|
|
import time
|
|
|
|
_rawdelay = None
|
|
|
|
try:
|
|
stdout = sys.stdout.buffer
|
|
except AttributeError:
|
|
# Python2 doesn't have buffer attr
|
|
stdout = sys.stdout
|
|
|
|
def stdout_write_bytes(b):
|
|
b = b.replace(b"\x04", b"")
|
|
stdout.write(b)
|
|
stdout.flush()
|
|
|
|
class PyboardError(BaseException):
|
|
pass
|
|
|
|
class TelnetToSerial:
|
|
def __init__(self, ip, user, password, read_timeout=None):
|
|
import telnetlib
|
|
self.tn = telnetlib.Telnet(ip, timeout=15)
|
|
self.read_timeout = read_timeout
|
|
if b'Login as:' in self.tn.read_until(b'Login as:', timeout=read_timeout):
|
|
self.tn.write(bytes(user, 'ascii') + b"\r\n")
|
|
|
|
if b'Password:' in self.tn.read_until(b'Password:', timeout=read_timeout):
|
|
# needed because of internal implementation details of the telnet server
|
|
time.sleep(0.2)
|
|
self.tn.write(bytes(password, 'ascii') + b"\r\n")
|
|
|
|
if b'for more information.' in self.tn.read_until(b'Type "help()" for more information.', timeout=read_timeout):
|
|
# login succesful
|
|
from collections import deque
|
|
self.fifo = deque()
|
|
return
|
|
|
|
raise PyboardError('Failed to establish a telnet connection with the board')
|
|
|
|
def __del__(self):
|
|
self.close()
|
|
|
|
def close(self):
|
|
try:
|
|
self.tn.close()
|
|
except:
|
|
# the telnet object might not exist yet, so ignore this one
|
|
pass
|
|
|
|
def read(self, size=1):
|
|
while len(self.fifo) < size:
|
|
timeout_count = 0
|
|
data = self.tn.read_eager()
|
|
if len(data):
|
|
self.fifo.extend(data)
|
|
timeout_count = 0
|
|
else:
|
|
time.sleep(0.25)
|
|
if self.read_timeout is not None and timeout_count > 4 * self.read_timeout:
|
|
break
|
|
timeout_count += 1
|
|
|
|
data = b''
|
|
while len(data) < size and len(self.fifo) > 0:
|
|
data += bytes([self.fifo.popleft()])
|
|
return data
|
|
|
|
def write(self, data):
|
|
self.tn.write(data)
|
|
return len(data)
|
|
|
|
def inWaiting(self):
|
|
n_waiting = len(self.fifo)
|
|
if not n_waiting:
|
|
data = self.tn.read_eager()
|
|
self.fifo.extend(data)
|
|
return len(data)
|
|
else:
|
|
return n_waiting
|
|
|
|
class Pyboard:
|
|
def __init__(self, device, baudrate=115200, user='micro', password='python', wait=0, rawdelay=0):
|
|
global _rawdelay
|
|
_rawdelay = rawdelay
|
|
if device and device[0].isdigit() and device[-1].isdigit() and device.count('.') == 3:
|
|
# device looks like an IP address
|
|
self.serial = TelnetToSerial(device, user, password, read_timeout=10)
|
|
else:
|
|
import serial
|
|
delayed = False
|
|
for attempt in range(wait + 1):
|
|
try:
|
|
self.serial = serial.Serial(device, baudrate=baudrate, interCharTimeout=1)
|
|
break
|
|
except (OSError, IOError): # Py2 and Py3 have different errors
|
|
if wait == 0:
|
|
continue
|
|
if attempt == 0:
|
|
sys.stdout.write('Waiting {} seconds for pyboard '.format(wait))
|
|
delayed = True
|
|
time.sleep(1)
|
|
sys.stdout.write('.')
|
|
sys.stdout.flush()
|
|
else:
|
|
if delayed:
|
|
print('')
|
|
raise PyboardError('failed to access ' + device)
|
|
if delayed:
|
|
print('')
|
|
|
|
def close(self):
|
|
self.serial.close()
|
|
|
|
def read_until(self, min_num_bytes, ending, timeout=10, data_consumer=None):
|
|
data = self.serial.read(min_num_bytes)
|
|
if data_consumer:
|
|
data_consumer(data)
|
|
timeout_count = 0
|
|
while True:
|
|
if data.endswith(ending):
|
|
break
|
|
elif self.serial.inWaiting() > 0:
|
|
new_data = self.serial.read(1)
|
|
data = data + new_data
|
|
if data_consumer:
|
|
data_consumer(new_data)
|
|
timeout_count = 0
|
|
else:
|
|
timeout_count += 1
|
|
if timeout is not None and timeout_count >= 100 * timeout:
|
|
break
|
|
time.sleep(0.01)
|
|
return data
|
|
|
|
def enter_raw_repl(self):
|
|
# Brief delay before sending RAW MODE char if requests
|
|
if _rawdelay > 0:
|
|
time.sleep(_rawdelay)
|
|
|
|
self.serial.write(b'\r\x03\x03') # ctrl-C twice: interrupt any running program
|
|
|
|
# flush input (without relying on serial.flushInput())
|
|
n = self.serial.inWaiting()
|
|
while n > 0:
|
|
self.serial.read(n)
|
|
n = self.serial.inWaiting()
|
|
|
|
self.serial.write(b'\r\x01') # ctrl-A: enter raw REPL
|
|
data = self.read_until(1, b'raw REPL; CTRL-B to exit\r\n>')
|
|
if not data.endswith(b'raw REPL; CTRL-B to exit\r\n>'):
|
|
print(data)
|
|
raise PyboardError('could not enter raw repl')
|
|
|
|
self.serial.write(b'\x04') # ctrl-D: soft reset
|
|
data = self.read_until(1, b'soft reboot\r\n')
|
|
if not data.endswith(b'soft reboot\r\n'):
|
|
print(data)
|
|
raise PyboardError('could not enter raw repl')
|
|
# By splitting this into 2 reads, it allows boot.py to print stuff,
|
|
# which will show up after the soft reboot and before the raw REPL.
|
|
# Modification from original pyboard.py below:
|
|
# Add a small delay and send Ctrl-C twice after soft reboot to ensure
|
|
# any main program loop in main.py is interrupted.
|
|
time.sleep(0.5)
|
|
self.serial.write(b'\x03')
|
|
time.sleep(0.1) # (slight delay before second interrupt
|
|
self.serial.write(b'\x03')
|
|
# End modification above.
|
|
data = self.read_until(1, b'raw REPL; CTRL-B to exit\r\n')
|
|
if not data.endswith(b'raw REPL; CTRL-B to exit\r\n'):
|
|
print(data)
|
|
raise PyboardError('could not enter raw repl')
|
|
|
|
def exit_raw_repl(self):
|
|
self.serial.write(b'\r\x02') # ctrl-B: enter friendly REPL
|
|
|
|
def follow(self, timeout, data_consumer=None):
|
|
# wait for normal output
|
|
data = self.read_until(1, b'\x04', timeout=timeout, data_consumer=data_consumer)
|
|
if not data.endswith(b'\x04'):
|
|
raise PyboardError('timeout waiting for first EOF reception')
|
|
data = data[:-1]
|
|
|
|
# wait for error output
|
|
data_err = self.read_until(1, b'\x04', timeout=timeout)
|
|
if not data_err.endswith(b'\x04'):
|
|
raise PyboardError('timeout waiting for second EOF reception')
|
|
data_err = data_err[:-1]
|
|
|
|
# return normal and error output
|
|
return data, data_err
|
|
|
|
def exec_raw_no_follow(self, command):
|
|
if isinstance(command, bytes):
|
|
command_bytes = command
|
|
else:
|
|
command_bytes = bytes(command, encoding='utf8')
|
|
|
|
# check we have a prompt
|
|
data = self.read_until(1, b'>')
|
|
if not data.endswith(b'>'):
|
|
raise PyboardError('could not enter raw repl')
|
|
|
|
# write command
|
|
for i in range(0, len(command_bytes), 256):
|
|
self.serial.write(command_bytes[i:min(i + 256, len(command_bytes))])
|
|
time.sleep(0.01)
|
|
self.serial.write(b'\x04')
|
|
|
|
# check if we could exec command
|
|
data = self.serial.read(2)
|
|
if data != b'OK':
|
|
raise PyboardError('could not exec command')
|
|
|
|
def exec_raw(self, command, timeout=10, data_consumer=None):
|
|
self.exec_raw_no_follow(command);
|
|
return self.follow(timeout, data_consumer)
|
|
|
|
def eval(self, expression):
|
|
ret = self.exec_('print({})'.format(expression))
|
|
ret = ret.strip()
|
|
return ret
|
|
|
|
def exec_(self, command):
|
|
ret, ret_err = self.exec_raw(command)
|
|
if ret_err:
|
|
raise PyboardError('exception', ret, ret_err)
|
|
return ret
|
|
|
|
def execfile(self, filename):
|
|
with open(filename, 'rb') as f:
|
|
pyfile = f.read()
|
|
return self.exec_(pyfile)
|
|
|
|
def get_time(self):
|
|
t = str(self.eval('pyb.RTC().datetime()'), encoding='utf8')[1:-1].split(', ')
|
|
return int(t[4]) * 3600 + int(t[5]) * 60 + int(t[6])
|
|
|
|
# in Python2 exec is a keyword so one must use "exec_"
|
|
# but for Python3 we want to provide the nicer version "exec"
|
|
setattr(Pyboard, "exec", Pyboard.exec_)
|
|
|
|
def execfile(filename, device='/dev/ttyACM0', baudrate=115200, user='micro', password='python'):
|
|
pyb = Pyboard(device, baudrate, user, password)
|
|
pyb.enter_raw_repl()
|
|
output = pyb.execfile(filename)
|
|
stdout_write_bytes(output)
|
|
pyb.exit_raw_repl()
|
|
pyb.close()
|
|
|
|
def main():
|
|
import argparse
|
|
cmd_parser = argparse.ArgumentParser(description='Run scripts on the pyboard.')
|
|
cmd_parser.add_argument('--device', default='/dev/ttyACM0', help='the serial device or the IP address of the pyboard')
|
|
cmd_parser.add_argument('-b', '--baudrate', default=115200, help='the baud rate of the serial device')
|
|
cmd_parser.add_argument('-u', '--user', default='micro', help='the telnet login username')
|
|
cmd_parser.add_argument('-p', '--password', default='python', help='the telnet login password')
|
|
cmd_parser.add_argument('-c', '--command', help='program passed in as string')
|
|
cmd_parser.add_argument('-w', '--wait', default=0, type=int, help='seconds to wait for USB connected board to become available')
|
|
cmd_parser.add_argument('--follow', action='store_true', help='follow the output after running the scripts [default if no scripts given]')
|
|
cmd_parser.add_argument('files', nargs='*', help='input files')
|
|
args = cmd_parser.parse_args()
|
|
|
|
def execbuffer(buf):
|
|
try:
|
|
pyb = Pyboard(args.device, args.baudrate, args.user, args.password, args.wait)
|
|
pyb.enter_raw_repl()
|
|
ret, ret_err = pyb.exec_raw(buf, timeout=None, data_consumer=stdout_write_bytes)
|
|
pyb.exit_raw_repl()
|
|
pyb.close()
|
|
except PyboardError as er:
|
|
print(er)
|
|
sys.exit(1)
|
|
except KeyboardInterrupt:
|
|
sys.exit(1)
|
|
if ret_err:
|
|
stdout_write_bytes(ret_err)
|
|
sys.exit(1)
|
|
|
|
if args.command is not None:
|
|
execbuffer(args.command.encode('utf-8'))
|
|
|
|
for filename in args.files:
|
|
with open(filename, 'rb') as f:
|
|
pyfile = f.read()
|
|
execbuffer(pyfile)
|
|
|
|
if args.follow or (args.command is None and len(args.files) == 0):
|
|
try:
|
|
pyb = Pyboard(args.device, args.baudrate, args.user, args.password, args.wait)
|
|
ret, ret_err = pyb.follow(timeout=None, data_consumer=stdout_write_bytes)
|
|
pyb.close()
|
|
except PyboardError as er:
|
|
print(er)
|
|
sys.exit(1)
|
|
except KeyboardInterrupt:
|
|
sys.exit(1)
|
|
if ret_err:
|
|
stdout_write_bytes(ret_err)
|
|
sys.exit(1)
|
|
|
|
if __name__ == "__main__":
|
|
main()
|