You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
27 lines
1.4 KiB
Markdown
27 lines
1.4 KiB
Markdown
Adapter PCB to support up to 3 panel chains
|
|
===========================================
|
|
|
|
* This is a passive board. It is simple, but the logic level will be out of
|
|
spec for the LED matrix (3.3V vs. 5V) which might or might not work.
|
|
Driving long cables with the GPIO pins is also not a good idea.
|
|
* You typically want to consider using the [active board](../active-3).
|
|
* Works for Matrix up to 1:16 multiplexing (32 rows). For 1:32 multiplexing,
|
|
you want to use the [active board](../active-3). You can of also hack
|
|
this board as [suggested in this bugtracker entry](https://github.com/hzeller/rpi-rgb-led-matrix/issues/360#issuecomment-321104348) to make it work with
|
|
64x64 boards.
|
|
* Only really advisable, if the LED panels have 74HCT245 (as opposed to just
|
|
74HC245) in their input stage, because then they can deal properly with
|
|
the 3.3V logic levels coming from the Pi.
|
|
* Supports up to three panel chains for newer plus models and
|
|
Raspberry Pi 2/3 that have 40 GPIO pins.
|
|
* Open source KiCAD PCB EDA format.
|
|
* (not very pretty layout, was just lazy and let the auto-router do it).
|
|
* The FAB files are provided as [passive3-rpi-hub75-adapter-fab.zip](./passive3-rpi-hub75-adapter-fab.zip)
|
|
|
|
This board is [shared on OSH Park][osh-passive3] (not affiliated).
|
|
|
|
![Preview][rendering]
|
|
|
|
[rendering]: ../../img/passive3-pcb.png
|
|
[osh-passive3]: https://oshpark.com/shared_projects/FNAtZUsP
|