You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24 lines
1.2 KiB
Markdown
24 lines
1.2 KiB
Markdown
PCB adapter for Raspberry Pi to Hub75 RGB Matrixes
|
|
==================================================
|
|
|
|
Since hand-wiring can be a little tedious, here are some PCBs that help
|
|
with the wiring when using the `rpi-rgb-led-matrix` code.
|
|
|
|
* [Passive-3](./passive-3) Supports three parallel chains, directly connected
|
|
to the output of a Rapsberry Pi with 40 GPIO pins. Works, but usually it is better to
|
|
buffer the outputs using the ...
|
|
* [Active-3](./active-3) board. Supports three parallel chains with active buffering
|
|
and 3.3V -> 5V level shifting for best reliability. Requires SMD soldering.
|
|
|
|
As another option you can buy it from these locations not affiliated with this project.
|
|
They are given to help you locate premade boards but no guarantees are given or implied:
|
|
* https://www.electrodragon.com/product/rgb-matrix-panel-drive-board-raspberry-pi/
|
|
($3/board, but fairly long and/or expensive shipping from HKG)
|
|
* Seller #2 (fill me)
|
|
* The [Passive-RPi1](./passive-rpi1) adapter board is to connect one panel to
|
|
Raspberry Pi 1 with 26 GPIO pins.
|
|
|
|
![Three Panels connected][three-panels]
|
|
|
|
[three-panels]: ../img/three-parallel-panels-soic.jpg
|